Completed Custom_MOD SFX 9.3L

sergiiua

The builder of unique cases ...
Original poster
CustomMOD
Jan 11, 2017
1,075
1,924
www.custmod.com
Specs:
- CASE -- PHOTO ALBUM
- Volume: 9.3L (265x220x160mm)
- Weight 1.5kg
- Production: ESI METAL factory (video), swiss solutions «Bystronic»
- Material: 1.5mm Aluminium, Powder Coating
- GPU: length <230mm, height <135mm
- CPU Cooler: up to 60mm
- Storage: 3x SSD/HDD 2.5"
- PSU: SFX / SFX-L
- PCIe riser: LiHeat 200mm B.type
- Сooling: 1x120mm fan front
WATERCOOLING:
120mm Radiators up to 130mm wide, up to 155mm tall. (bequiet SILENT LOOP | 120mm)
Thickness of the radiator + fan should not exceed 60mm


 
Last edited:

grumpyrobin

Airflow Optimizer
May 11, 2017
260
189
I like the design, and I was really hoping that you would make a bigger case.

so it is kind of akward to ask this........
if the GPU is at a right angle to the motherboard....woudln't it be better to just have a standard layout so you can have 130mm cpu cooler clearance?
or is the point of this layout that by saccrificing the cpu height you make more room for the PSU/storage while keeping everything compact?
 

sergiiua

The builder of unique cases ...
Original poster
CustomMOD
Jan 11, 2017
1,075
1,924
www.custmod.com
I like the design, and I was really hoping that you would make a bigger case.

so it is kind of akward to ask this........
if the GPU is at a right angle to the motherboard....woudln't it be better to just have a standard layout so you can have 130mm cpu cooler clearance?
or is the point of this layout that by saccrificing the cpu height you make more room for the PSU/storage while keeping everything compact?
Many options considered. It seems this is the most compact. Plus has not seen such a layout.:)
 
  • Like
Reactions: Jonny727272

W1NN1NG

King of Cable Management
Jan 19, 2017
616
532
I like the design, and I was really hoping that you would make a bigger case.

so it is kind of akward to ask this........
if the GPU is at a right angle to the motherboard....woudln't it be better to just have a standard layout so you can have 130mm cpu cooler clearance?
or is the point of this layout that by saccrificing the cpu height you make more room for the PSU/storage while keeping everything compact?
pretty sure the point is for an AiO watercooler tbh or that as such as a fractal kelvin etc
 

Revenant

SFF Guru
Revenant Tech
Editorial Staff
Moderator
Gold Supporter
Apr 21, 2017
1,209
1,950
NICE.. excellent placement of the GPU on top. Should allow a 1080ti mini. I like the hard drive mounts. Perhaps you can fit a 3.5 inch drive in there. I would want to close off the front of the case though to keep noise to a minimum though.
 

CC Ricers

Shrink Ray Wielder
Bronze Supporter
Nov 1, 2015
2,149
2,407
If I didn't know any better, you could probably fit a custom water cooled loop in there and have the GPU waterblock show off with a clear top panel!
 

psycho88

Average Stuffer
Jan 18, 2017
56
28
it's nice, but from the position of the GPU, i think i can't use full cover waterblock for my GPU,
i Like the GPU & motherboard position/orientation just like case Flex mini you've made before,
plus with mobo&GPU position in case flex mini, we can show off the GPU & motherboard (with acrylic panels)
sorry for my RIP english