Reply to thread

Message

[MEDIA=imgur]a/SRuCr[/MEDIA]

I got the case and I love the looks and textured paint.. but there are some glaring issues.

Tthe 1060 Zotac which is stated as compatible is only compatible when you take off the mounting bracket.
The power plug on the rear has to be mounted on an angle because their is a rivet on the other side. This makes plugging and unplugging next to impossible.
The motherboard tray is too small - I can only ever get two screws mounted at once.
The front panel mounting is less than desirable as the mounting holes are on very thin flexible pieces of metal that get moved during installation.
You have to slightly flex the frame to get the motherboard mounted.
You have to install the power button by spinning the button itself as their isn't enough room to twist the nut.

<blockquote data-quote="Michael" data-source="post: 62869" data-attributes="member: 167">[MEDIA=imgur]a/SRuCr[/MEDIA]I got the case and I love the looks and textured paint.. but there are some glaring issues.<ul>
<li data-xf-list-type="ul">Tthe 1060 Zotac which is stated as compatible is only compatible when you take off the mounting bracket.</li>
<li data-xf-list-type="ul">The power plug on the rear has to be mounted on an angle because their is a rivet on the other side. This makes plugging and unplugging next to impossible.</li>
<li data-xf-list-type="ul">The motherboard tray is too small - I can only ever get two screws mounted at once.</li>
<li data-xf-list-type="ul">The front panel mounting is less than desirable as the mounting holes are on very thin flexible pieces of metal that get moved during installation.</li>
<li data-xf-list-type="ul">You have to slightly flex the frame to get the motherboard mounted.</li>
<li data-xf-list-type="ul">You have to install the power button by spinning the button itself as their isn't enough room to twist the nut.</li>
</ul></blockquote>

[QUOTE="Michael, post: 62869, member: 167"] [MEDIA=imgur]a/SRuCr[/MEDIA] I got the case and I love the looks and textured paint.. but there are some glaring issues. [LIST] [*]Tthe 1060 Zotac which is stated as compatible is only compatible when you take off the mounting bracket. [*]The power plug on the rear has to be mounted on an angle because their is a rivet on the other side. This makes plugging and unplugging next to impossible. [*]The motherboard tray is too small - I can only ever get two screws mounted at once. [*]The front panel mounting is less than desirable as the mounting holes are on very thin flexible pieces of metal that get moved during installation. [*]You have to slightly flex the frame to get the motherboard mounted. [*]You have to install the power button by spinning the button itself as their isn't enough room to twist the nut. [/LIST] [/QUOTE]

Verification