Reply to thread

Message

okay the inside height should more than clear a vertical mount from the bottom (and then 280mm rad at the front)

but for the horizontal option, the inside length won't be able to clear if you're using the stage-2 standoffs
inside length of CX is 329mm
stage 2 mount is 58mm + Zotac 1080ti arcticstorm is 300mm (not sure if it includes that PCI flange on top)
totalling 358mm (-10mm ish for said flange, but I still doubt it'd clear)
if you're not using the standoffs and want the upside-down horizontal mounting (with the rad staying put at the bottom) then be prepared to cut the front vents. you might need right-angle cable adapters for the HDMI and DP connections as well

EDIT: I haven't considered PSU placement yet, and I'm starting to think there might be placement issues if you're using a full ATX PSU in the bottom vertical setup...

<blockquote data-quote="VegetableStu" data-source="post: 77955" data-attributes="member: 666">okay the inside height should more than clear a vertical mount from the bottom (and then 280mm rad at the front)but for the horizontal option, the inside length won't be able to clear if you're using the stage-2 standoffs<ul>
<li data-xf-list-type="ul">inside length of CX is 329mm</li>
<li data-xf-list-type="ul">stage 2 mount is 58mm + Zotac 1080ti arcticstorm is 300mm (not sure if it includes that PCI flange on top)<ul>
<li data-xf-list-type="ul">totalling 358mm (-10mm ish for said flange, but I still doubt it'd clear)</li>
</ul></li>
</ul>if you're not using the standoffs and want the upside-down horizontal mounting (with the rad staying put at the bottom) then be prepared to cut the front vents. you might need right-angle cable adapters for the HDMI and DP connections as wellEDIT: I haven't considered PSU placement yet, and I'm starting to think there might be placement issues if you're using a full ATX PSU in the bottom vertical setup...</blockquote>

[QUOTE="VegetableStu, post: 77955, member: 666"] okay the inside height should more than clear a vertical mount from the bottom (and then 280mm rad at the front) but for the horizontal option, the inside length won't be able to clear if you're using the stage-2 standoffs [LIST] [*]inside length of CX is [B]329mm[/B] [*]stage 2 mount is 58mm + Zotac 1080ti arcticstorm is 300mm (not sure if it includes that PCI flange on top) [LIST] [*]totalling [B]358mm[/B] (-10mm ish for said flange, but I still doubt it'd clear) [/LIST] [/LIST] if you're not using the standoffs and want the upside-down horizontal mounting (with the rad staying put at the bottom) then be prepared to cut the front vents. you might need right-angle cable adapters for the HDMI and DP connections as well EDIT: I haven't considered PSU placement yet, and I'm starting to think there might be placement issues if you're using a full ATX PSU in the bottom vertical setup... [/QUOTE]

Verification