Normal
It seems the window panel does lay flat as there aren't any clips for the middle section. So while the top and bottom clip in fine, the middle bulges out as there is nothing to hold it down.Finally got my beige Cerberus X. The beige looks mostly (soft) white to me so I'm not sure if there's any point in having a beige and white option. Anyways, as I haven't been able to find a build with full custom loop in the Cerberus X, I thought I should share mine.[MEDIA=imgur]a/aZjx7Lv[/MEDIA]The pump/res is mounted using the included mounting kit + some screws and washers for anyone interested. I thought I might have to change my PSU as it's kinda long (170mm) but managed to make it fit. If I were building from scratch and not re-using parts from a previous build I would probably have went with a shorter PSU like the Seasonic Focus Gold series (140mm) as fitting the pump on the bracket next to the PSU required some specific order of operations + stress.PC Parts:Ryzen 2700xTitan X (Pascal)32GB G.Skill TridentZ CL142x 1TB M.2 SSDsSeasonic PRIME ULTRA 1000 Titanium PSUWatercooling Parts:Hardware Labs GTS 280 (Front) w/ Be Quiet! SilentWings 3Hardware Labs GTS 240 (Bottom) w/ Phanteks PH-F120MPSwiftech Maelstrom Reservoir with Integrated D5 Pump (50mm res)XSPC Raystorm Neo CPU BlockEKWB Titan X Pascal WaterblockXSPC Fittings (3/8" ID, 5/8" OD)Mayhems Pastel White Coolant
It seems the window panel does lay flat as there aren't any clips for the middle section. So while the top and bottom clip in fine, the middle bulges out as there is nothing to hold it down.
Finally got my beige Cerberus X. The beige looks mostly (soft) white to me so I'm not sure if there's any point in having a beige and white option. Anyways, as I haven't been able to find a build with full custom loop in the Cerberus X, I thought I should share mine.
[MEDIA=imgur]a/aZjx7Lv[/MEDIA]
The pump/res is mounted using the included mounting kit + some screws and washers for anyone interested. I thought I might have to change my PSU as it's kinda long (170mm) but managed to make it fit. If I were building from scratch and not re-using parts from a previous build I would probably have went with a shorter PSU like the Seasonic Focus Gold series (140mm) as fitting the pump on the bracket next to the PSU required some specific order of operations + stress.
PC Parts:
Watercooling Parts:
