Normal
Right, quick update. Not good.A spare set of https://www.nzxt.com/products/aer-p lying around, so I took the shroud off again and the left fan to see if it would fit. It does fit, BUT the fan is prevented from spinning (whichever way you face it) by the bit of metal circled below:92mm fans will work fine, but I would worry about the coverage you'd get. Would probably need 3 x 92mm fans to cover the whole heatsink.In addition to this, the connector to the PCB is a weird one (I think it does both fans and RGB) and that cable is connected to the right fan which has a female normal pwm fan connector which the other fan then connects to.So it would seem like its gonna be a lot of effort to get this card working.Also for reference, this is the fan:
Right, quick update. Not good.
A spare set of https://www.nzxt.com/products/aer-p lying around, so I took the shroud off again and the left fan to see if it would fit. It does fit, BUT the fan is prevented from spinning (whichever way you face it) by the bit of metal circled below:
92mm fans will work fine, but I would worry about the coverage you'd get. Would probably need 3 x 92mm fans to cover the whole heatsink.
In addition to this, the connector to the PCB is a weird one (I think it does both fans and RGB) and that cable is connected to the right fan which has a female normal pwm fan connector which the other fan then connects to.
So it would seem like its gonna be a lot of effort to get this card working.
Also for reference, this is the fan:
