Reply to thread

Message

Hi All!

I've been lurking for a while now, and am buying parts now for my first REALLY small machine..

All the "published measurements" work to get me just above 3 liters (with whole PSU onboard)

A few questions:

Anyone actually have an Asus 1080ti Turbo blower edition (Like this one) https://www.asus.com/Graphics-Cards/TURBO-GTX1080TI-11G/specifications/ They can measure for me?

I get to where my card is in 2 weeks (I travel a lot and am in SE Asia at the moment) and I am wondering: the published measurements are 1.5" x 4.38" x 10.5" does that include the lower PCI mount itself? and does the 10.5 include the half inch or so that the pci plate sticks out at the side where the ports are?

Essentially the card will lay flat using a 9cm riser to make the 90 degree bend and the distance between 6.7 for the board and 10.something will be occupied by an HDPLEX or G-Unique (Thoughts on which is better?, does Gury do an internal ac-dc adapter?)

So looking at dimensions of 10.9 x 10.5 x 1.63 or less depending on the questions above.

Thanks!

<blockquote data-quote="Todayican2" data-source="post: 58012" data-attributes="member: 1471">Hi All!I've been lurking for a while now, and am buying parts now for my first REALLY small machine..All the &quot;published measurements&quot; work to get me just above 3 liters (with whole PSU onboard)A few questions:Anyone actually have an Asus 1080ti Turbo blower edition (Like this one) <a href="https://www.asus.com/Graphics-Cards/TURBO-GTX1080TI-11G/specifications/">https://www.asus.com/Graphics-Cards/TURBO-GTX1080TI-11G/specifications/</a> They can measure for me?I get to where my card is in 2 weeks (I travel a lot and am in SE Asia at the moment) and I am wondering: the published measurements are 1.5&quot; x 4.38&quot; x 10.5&quot; does that include the lower PCI mount itself? and does the 10.5 include the half inch or so that the pci plate sticks out at the side where the ports are?Essentially the card will lay flat using a 9cm riser to make the 90 degree bend and the distance between 6.7 for the board and 10.something will be occupied by an HDPLEX or G-Unique (Thoughts on which is better?, does Gury do an internal ac-dc adapter?)So looking at dimensions of 10.9 x 10.5 x 1.63 or less depending on the questions above.Thanks!</blockquote>

[QUOTE="Todayican2, post: 58012, member: 1471"] Hi All! I've been lurking for a while now, and am buying parts now for my first REALLY small machine.. All the "published measurements" work to get me just above 3 liters (with whole PSU onboard) A few questions: Anyone actually have an Asus 1080ti Turbo blower edition (Like this one) [URL]https://www.asus.com/Graphics-Cards/TURBO-GTX1080TI-11G/specifications/[/URL] They can measure for me? I get to where my card is in 2 weeks (I travel a lot and am in SE Asia at the moment) and I am wondering: the published measurements are 1.5" x 4.38" x 10.5" does that include the lower PCI mount itself? and does the 10.5 include the half inch or so that the pci plate sticks out at the side where the ports are? Essentially the card will lay flat using a 9cm riser to make the 90 degree bend and the distance between 6.7 for the board and 10.something will be occupied by an HDPLEX or G-Unique (Thoughts on which is better?, does Gury do an internal ac-dc adapter?) So looking at dimensions of 10.9 x 10.5 x 1.63 or less depending on the questions above. Thanks! [/QUOTE]

Verification