Normal
I recommend uploading to imgur.com as a host instead, if you have access to it.1. Leave the connector as stock. Don't worry about it.2. For the new connector you are making, 6pin JST to 4 pin mini fit Jr use 4 individual wires, use 4 pins for both sides. No "shorting." use the second diagram for making your connector.I would also avoid the term shorting as it implies an unintended circuit. I do understand what you mean.Most people indicate that as 2+2 or a jumped wiring.I wouldn't worry about unless your build pulls over 150W.
I recommend uploading to imgur.com as a host instead, if you have access to it.
1. Leave the connector as stock. Don't worry about it.
2. For the new connector you are making, 6pin JST to 4 pin mini fit Jr use 4 individual wires, use 4 pins for both sides. No "shorting." use the second diagram for making your connector.
I would also avoid the term shorting as it implies an unintended circuit. I do understand what you mean.
Most people indicate that as 2+2 or a jumped wiring.
I wouldn't worry about unless your build pulls over 150W.
