Normal
I don't use AMD, but I can comment on high end CPU temps on a custom modded Dan A4.1 - I have a Asus z490 i-gaming mobo, and a i5-10600K CPU - I use the Acetek AIO cooler and the CPU thermals are absolutely fine. However, due to the lack of airflow over the M.2 drives, these were getting very hot (dangerously hot) - I have had to install a Noctua 40mm 5000RPM fan over the M.2 drive which has pushed the temps way down to where they should be.For reference I have the 3080FE, so that is also exhausted heat into the case, as well as using a high power draw as well as the CPU but it is manageable and not running dangerously hot whilst gaming at 4k.I have also put a custom OC on, as well as cutom fan curves to optimise the temps/heat/noise tradeoff
I don't use AMD, but I can comment on high end CPU temps on a custom modded Dan A4.1 - I have a Asus z490 i-gaming mobo, and a i5-10600K CPU - I use the Acetek AIO cooler and the CPU thermals are absolutely fine. However, due to the lack of airflow over the M.2 drives, these were getting very hot (dangerously hot) - I have had to install a Noctua 40mm 5000RPM fan over the M.2 drive which has pushed the temps way down to where they should be.
For reference I have the 3080FE, so that is also exhausted heat into the case, as well as using a high power draw as well as the CPU but it is manageable and not running dangerously hot whilst gaming at 4k.
I have also put a custom OC on, as well as cutom fan curves to optimise the temps/heat/noise tradeoff
