Join the Discussion - To hell with nVidia's definition of SFF ready. What should be the actual SFF standard?

Reply to thread

Message

I set my Deskmini X300 with 5700G to 20 Negative magnitude in curve optimizer and boostclock override to Positive 50. I get about 2200 - 2350 multicore in cb 15 (I know it is old) and the CPU powers up to 4,6+ Ghz allcore. In Prime with smallest SMTs and AVX disabled, it runs at about 3,94- 4,09 GHz all core with no thermal throttle, 24h stable with my 3200 mhz cl 20 64 GB Ramkit (KF432S20IBK2/64) on 1,2V. Once I change Ram / Infinity fabric clocks a little over 3200Ram / 1600IF it crashes in Prime95 smallest SMT during about 1-3 hour, I tryed changeing Ram voltage to 1,35v but it doesnt help. Do you have any suggestions what else I could be doing wrong?

Also the CPU z Core Voltage is always unter 0,7v what I cant imagine to be right, in HW info the Core VID looks about right. Is it maxbe a bug in the bios?

The CPU Temp never goes over 86 in Prime95 and sits usually around 79 - 82,5. I suppose I could get it cooler since my noctua isnt even on full speed.

Power Delivery should be okay I use a 240w gan PSU.

<blockquote data-quote="Maxkmk" data-source="post: 292392" data-attributes="member: 33146">I set my Deskmini X300 with 5700G to 20 Negative magnitude in curve optimizer and boostclock override to Positive 50. I get about 2200 - 2350 multicore&nbsp; in cb 15 (I know it is old)&nbsp; and the CPU powers up to 4,6+ Ghz allcore. In Prime with smallest SMTs and AVX disabled, it runs at about 3,94- 4,09 GHz all core with no thermal throttle, 24h stable with my 3200 mhz cl 20 64 GB Ramkit (KF432S20IBK2/64) on 1,2V. Once I change Ram / Infinity fabric clocks a little over 3200Ram / 1600IF it crashes in Prime95 smallest SMT during about 1-3 hour, I tryed changeing Ram voltage to 1,35v but it doesnt help. Do you have any suggestions what else I could be doing wrong?Also the CPU z Core Voltage is always unter 0,7v what I cant imagine to be right, in HW info the Core VID looks about right. Is it maxbe a bug in the bios?The CPU Temp never goes over 86 in Prime95 and sits usually around 79 - 82,5. I suppose I could get it cooler since my noctua isnt even on full speed.Power Delivery should be okay I use a 240w gan PSU.</blockquote>

[QUOTE="Maxkmk, post: 292392, member: 33146"] I set my Deskmini X300 with 5700G to 20 Negative magnitude in curve optimizer and boostclock override to Positive 50. I get about 2200 - 2350 multicore in cb 15 (I know it is old) and the CPU powers up to 4,6+ Ghz allcore. In Prime with smallest SMTs and AVX disabled, it runs at about 3,94- 4,09 GHz all core with no thermal throttle, 24h stable with my 3200 mhz cl 20 64 GB Ramkit (KF432S20IBK2/64) on 1,2V. Once I change Ram / Infinity fabric clocks a little over 3200Ram / 1600IF it crashes in Prime95 smallest SMT during about 1-3 hour, I tryed changeing Ram voltage to 1,35v but it doesnt help. Do you have any suggestions what else I could be doing wrong? Also the CPU z Core Voltage is always unter 0,7v what I cant imagine to be right, in HW info the Core VID looks about right. Is it maxbe a bug in the bios? The CPU Temp never goes over 86 in Prime95 and sits usually around 79 - 82,5. I suppose I could get it cooler since my noctua isnt even on full speed. Power Delivery should be okay I use a 240w gan PSU. [/QUOTE]

Verification