Concept Little ideas of greatness

Windfall

Shrink Ray Wielder
SFFn Staff
Nov 14, 2017
2,117
1,582
I really don't know if there's anyone following this idea, but I'm really down for it right now. The carbon fiber stand is on its way and i'll probly have it done by the weekend.

Probable part measurements:

I could design and 3D print an alternate backplate for the case. DM me.
 
  • Like
Reactions: cleveland

Windfall

Shrink Ray Wielder
SFFn Staff
Nov 14, 2017
2,117
1,582
Nice!

Should have a good backplate design soon, if you could send me a basic MS paint drawing, that would be great!

EDIT: That's not the m350 in that picture. What case is it?
 
Last edited:

cleveland

Master of Cramming
Original poster
Sep 8, 2016
455
240
EDIT: That's not the m350 in that picture. What case is it?
That's some nice case i found out at my fav retailer's shop.

Sadly it has no name besides "ultra small pc chassis". bought for roughly 20 dollars... :)

if you could send me a basic MS paint drawing, that would be great!
My carbon fiber plate is taking longer than expected. As soon as I get my hands on it, you'll have MS paint drawings, photos and everything i can provide ;)
 
  • Like
Reactions: Windfall

cleveland

Master of Cramming
Original poster
Sep 8, 2016
455
240
PCIe riser: 35mm is JUST enough to pass underneath the mobo and bend to sit in place.

Testing the rig with an r7 250. 1030 is on its way to my home...

...so far, so good! :)
 
Last edited:
  • Like
Reactions: Jello

Windfall

Shrink Ray Wielder
SFFn Staff
Nov 14, 2017
2,117
1,582
PCIe riser: 35mm is JUST enough to pass underneath the mobo and bend to sit in place.

Testing the rig with an r7 250. 1030 is on its way to my home...

...so far, so good! :)

Looks great! I need to get back to you regarding that backplate.
 

cleveland

Master of Cramming
Original poster
Sep 8, 2016
455
240
Looks great! I need to get back to you regarding that backplate.
I'm in debt with you too, @Windfall. I'll talk about the backplate soon, but first I need to get my s...tuff together.


the 19mm side of my stand needs to be at least 35mm tall, or it wont fit alongside CPU heatsink.

Regardless of that, don't worry: I'll be in touch as soon as everything starts to go all right. ;)
 
Last edited:

cleveland

Master of Cramming
Original poster
Sep 8, 2016
455
240
@owliwar, it costs around R$ 120.00, including shipping and taxes. Less if you find it on a "hot deal". The price is better than noctua and cryorig, here in Brazil.
 
  • Like
Reactions: owliwar