Lone L4 render machine

vanbeveren

SFF Lingo Aficionado
Mar 21, 2019
142
95
I'm assuming the RAM is in the way or something, but would the cooling be even better on the CPU if the fins of the cooler were parallel to the RAM and allowing air to blow up and right through them and out?
 

Nanook

King of Cable Management
Original poster
May 23, 2016
805
793
I'm assuming the RAM is in the way or something, but would the cooling be even better on the CPU if the fins of the cooler were parallel to the RAM and allowing air to blow up and right through them and out?
I think the heatsink only fits one way in this case.
 
  • Like
Reactions: vanbeveren

vanbeveren

SFF Lingo Aficionado
Mar 21, 2019
142
95
Do those case fans touch the exterior case of the lone?
Any clearance at all?

I’m wondering if I could do a similar modification with the RX 560 that is also from MSI

The only thing is, on these sheets, there looks to be a slight thickness difference and I am wondering if that means a slightly thicker heatsink and thus a problem doing what you did with those 80mm fans?

https://asset.msi.com/pdf/main/global/presale_v2/GeForce-GTX-1050-Ti-4GT-LP?

https://asset.msi.com/pdf/main/global/presale_v2/Radeon-RX-560-4GT-LP-OC?
 

Nanook

King of Cable Management
Original poster
May 23, 2016
805
793
Do those case fans touch the exterior case of the lone?
Any clearance at all?

I’m wondering if I could do a similar modification with the RX 560 that is also from MSI

The only thing is, on these sheets, there looks to be a slight thickness difference and I am wondering if that means a slightly thicker heatsink and thus a problem doing what you did with those 80mm fans?

https://asset.msi.com/pdf/main/global/presale_v2/GeForce-GTX-1050-Ti-4GT-LP?

https://asset.msi.com/pdf/main/global/presale_v2/Radeon-RX-560-4GT-LP-OC?
No, the bottom fans are within the case. I'm not sure how much room there is remaining to accommodate for the thicker RX560 you mentioned. Too bad I have already dismantled this build, and can't take measurements for you. I needed the 8700K somewhere else :/
 
  • Like
Reactions: vanbeveren

vanbeveren

SFF Lingo Aficionado
Mar 21, 2019
142
95
No, the bottom fans are within the case. I'm not sure how much room there is remaining to accommodate for the thicker RX560 you mentioned. Too bad I have already dismantled this build, and can't take measurements for you. I needed the 8700K somewhere else :/

No worries - just that bit of info is super helpful!
Thx!

Sorry you had to dismantle the build - gorgeous job!
Did you sell your Lone case also?
 

Nanook

King of Cable Management
Original poster
May 23, 2016
805
793
No worries - just that bit of info is super helpful!
Thx!

Sorry you had to dismantle the build - gorgeous job!
Did you sell your Lone case also?
Thanks! I still have the case. For some reason, I love bent, anodized aluminum boxes.