Recent content by youngdocument

  1. Y

    Concept Project: Radian - 13 Liter Dual 240 Rad ITX Chassis

    Looks fantastic. Any inlet/outlet ports planned for the case panels, maybe on the back? edit: read more carefully and see the answer is yes!
  2. Y

    Concept 17.5L modular case with 2*240mm radiator support and full side window

    Absolutely beautiful. Like hands down one of the best sub 20 watercooling layouts I've seen. I think enough of your target audience is familiar with sourcing things like riser cables and power buttons for that to not be a worry for you -- the thing almost none of us can do is get a case...
  3. Y

    Concept litecase - I first worked on this in 2018. A 12.5 L vertical case similar to an H1, but a little smaller with support for more cooling.

    I can’t be of any help on the manufacturing/file editing side either, but I love this case concept. Maybe the folks at Sliger could help? Shout out to SFF nerds with MFAs in poetry, thought I was the only one!
  4. Y

    Concept litecase - I first worked on this in 2018. A 12.5 L vertical case similar to an H1, but a little smaller with support for more cooling.

    edit: deleted double post
  5. Y

    Production Pluto: a 13L wood top tower by Artesian Builds

    @Shatrod, can the case be flipped 180 degrees, maybe by swapping the feet and top panel? I keep my PC to my left on my desk.
  6. Y

    Prototype Slim 140mm / 120mm Fan Adapter for 280mm Radiators

    Just ordered one of these from sendcutsend. Thank you so much for the design file, it’s exactly what I need to get 120mm fans on my 280mm rad. Life saver! Will definitely link back here and give credit when I post my build.
  7. Y

    Completed Knarr: ~12L case with a focus on liquid cooling and aesthetics

    So glad to see this coming back!
  8. Y

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    The water/core delta on my Bykski blocked 3080 MSI Ventus is 19-20 degrees under load too. I assume it’s fine!
  9. Y

    Production Aquanaut Basic/Extreme - Ultra Low Profile CPU Block & Pump Mount Combo

    Can confirm from a previous build that EK Torque 90 degree fittings and regular 10/16 STC fittings scratch and can rub off paint on the pump casing here.
  10. Y

    Log Jonsplus i100 Pro (not quite SFF)

    Very nice, I thought this was a cool case when I first saw it. What kind of room is there for a slim rad and fans under the gpu? 20mm slim rad and 15mm fans?
  11. Y

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    I won’t be in a position to buy a new case/redo my loop for a while, but I love the final version and hope it’ll be available beyond the first batch!
  12. Y

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    Looks great. Any chance we could ask for panels with smaller perforations, closer to what other cases like Sliger’s or the Ncase have?
  13. Y

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    It looks great, should be room to have the psu mounted on one side of the bracket and a flat pump/res on the other.
  14. Y

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    The case is looking great! Trying to visualize whether the PSU and an FLT120 D5 pump/res can both be mounted next to the motherboard, and not use the back panel mounting location for the PSU. Could a bracket of some kind be attached to the PSU to create a mounting point for the pump/res, like...
  15. Y

    Prototype Case under 20L, dual 240 rad focused on aesthetics

    I absolutely love this case! +1 for an update on the manufacturing and possible release?
See more