Recent content by Windeh
-
W
Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)
System: Motherboard: ASUS ROG Strix X570-I Gaming CPU: AMD R9 5950X GPU: ASUS TUF Gaming OC GEFORCE RTX 3090 RAM: 32GB G.Skill DDR4 3600MHz CL14-15-15-35 Storage: 2TB WD_BLACK SN850 NVMe SSD PSU: CORSAIR SF750 Wiring: MDPC-X 15-AWG hook-up wire Black Case: Sliger SM580 Sound Attenuation... -
W
Giveaway - LINKUP Ultra PCIE4.0 Riser Cable (The True Gen4 Designed for Gen4))
Would the riser cable not interfere with bottom 140mm fan? -
W
Crosshair VIII Impact + M1 v6 = High Chipset temp
Guys, update your BIOS to the latest version 1201. You can now control the Chipset fan. -
W
Reverse Ncase Power Cable
The cable is a good 5mm away from the power switch. -
W
NCASE M1 V6 GPU Compatibility List
The ASUS RTX 2080 Ti Strix OC is compatible with at least the NCASE M1 V6 without any disassembly of the card, no force required, no bending of the shroud etc. The card does not even touch the front IO, with about a 1mm gap. Front USB/Audio Jack may be compatible also, however I don't run them... -
W
Crosshair VIII Impact + M1 v6 = High Chipset temp
I unplugged the fan from the motherboard. -
W
NCase M1 V6 Build And Observations
The front audio IO can be connected without conflicting with the bottom rear fan. Once the connector is plugged in to the audio daughter board, only the thin wires extend pass the PCB, and can easily fit between the PCB and the fan without pinching. -
W
Crosshair VIII Impact + M1 v6 = High Chipset temp
I'm using the Swiftech Apogee Drive II and Hardware Labs GTS240 for the CPU. There are no control for the Chipset fan in BIOS and ASUS software. The Chipset sits around 70C at all times, and the fan just stays at around 4500RPM whining constantly. I got annoyed and was looking at the heatsink... -
W
NCASE M1 V6 GPU Compatibility List
A post further back in this thread links to an Asus 2080 Ti Strix OC stuffed in a non-V6 M1.