Recent content by wenrro

Are those the NF-A9x14 PWM fans? Maybe 2 x 120 mm fans should be too big for zipping them to the 1070 ti, right?

hehe, living on the edge XD anyway, i think i will do the fan mod and if the noise when idling at low rpms is low enough, i will reflash the original zotac bios. please, could you post a picture of your open ncase so i can view how it fits the accelero and the fans? regards

hi, it seems that 3100rpm is the max, at 74%. :)

Thank you all. The weird thing is that the fans get to 3000 rpm at 71%, and with the zotac bios, that was the maximum rpm at 100%. Maybe is something related to the fan controller of the 3 fans gigabyte card coded in its bios... Should it be safe for the fans to raise the rpm above 71%, or...

@CubanLegend @Broxin finally i flashed the gigabyte bios into the zotac 1070 ti mini, and now is very silent, you can even power off the smaller fan (the other remains switched on, but inaudible) Right now i have the fans set to 750 rpm in idle, while with the stock bios it was at 1200 rpm...

Hi, mr. Is there any chance that you upload the pics again? Thank you!

Thanks again :D The 1070 Ti has the same issue as the 1080 Ti with the fan header, it's blocked by the heatpipe. Maybe I'll try the flash mod, already backed my bios up with GPU-Z, and before i will set the bootable usb in case i need to use the integrated graphics adapter to reflash the card...

I have a ncase m1 so i think i should go for the 14mm ones. Thank you.

Should i go for the 14 mm or for the 25mm version? What would be more efficient? If i want more silence i should go for the 14mm i think. Thank you.

ok, i'm thinking in the fan mod more and more, but i would like to know if the zip ties make them estable, without no vibration or noise caused by this method. I think you are using small zip tiies, aren't you? And for the adaptor, something like this would work? You have the male in the GPU...

Hi again, what do you think about trying to flash this: https://www.techpowerup.com/vgabios/197132/gigabyte-gtx1070ti-8192-171016 on the zotac 1070 ti mini? https://www.techpowerup.com/vgabios/197029/zotac-gtx1070ti-8192-171016-1 Same power target and limits, clocks, one 8 pin connector...

thank you for your answer, @FullForceRainbow Is it absolutely necessary that the card whose bios i would flash into my zotac has the same pcb model as mine? For example, the evga 1070 Ti's seem to have a more complex pcb, even with two 8-pin conectors or so... although the bios has the same...

thank you for your fast response, LeyendaCubana! I think that changing the stock fans for 2 noctuas NF-A9X14 is less frightening than flashing a bios from another vendor :confused: but removing the heatsink is frightening too XD I will try to read the rest of the thread soon and get more info...

Hello everyone!!! pleased to meet you here! Recently i have purchased a zotac 1070 Ti mini (370€ "deal"), and guess what! i hate the 37% low threshold for the fans! for me is too much noise and i was thinking in returning it back. But i like the performance of this card, althought it makes a...