Recent content by THUMPer

I use fan filters. So, if most of your air is coming in through fans and fan filters, and you have more fans coming in than going out, Non filtered areas should not allow much air into the case. Works for me anyway on my mechanic master C28 Pulse.

The PSU comes with a single cable with 2 - 6+2 connectors on the end. The kit I have above comes 2 cables with a single 6+2 on each end. So technically you could have up to 4, 8 pins with cable kit.

I called Silverstone, and the gentleman was very helpful. He said these cables work and come in a pack of two.

Then I need to get an extra 6+2 cable. I dont have a 40 series card, but my 7900xtx needs an 850 PSU.

The website says it comes with 1, 2x6 PCIE power cable. Which seems odd... I was hoping for 2 or 3 of the "regular" power cables.

I saw this too and was interested. But this other Biostar board didnt get a great review. https://www.techpowerup.com/review/biostar-x670e-valkyrie/ I'll be shooting for a Gigabyte B650M Aorus Pro AX.

I'm running OPNSENSE on mine with a dual port intel NIC. Runs fine.

I like their products.

Awesome. I like that you can just buy heatsinks for cards as stand alone.

Plug this link into super buy search - For anyone else wondering. https://item.taobao.com/item.htm?id=646277963727

Pretty terrible. But not surprising.

Awesome! I went with the superbuy route and bought 2. I'm only using a 2 port card though, so it looks a little weird, but does the job just fine. Thanks for the FRU though. Hopefully my friends will be able to use it. Can the person that 3d prints do a dual port baffle?

is the CPU socket on this still off kilter? the b550i pro ax socket is higher and further back on the board currently. Which in my experience from 4 itx cases, makes tower coolers sit to close to the rear and top of some cases, making the cooler touch rear and top fans. (CM200 for example).

The newest ryzen master should be good. You can try the boost at -15. But I'm willing to bet you wont see much difference in clock speed with +200 vs +0. Some CPU's just can't get that high.

-30 all core and +200 is going to be a hard sell on any CPU. You are telling the CPU to run less voltage, while trying to boost 200 mhz over stock boost. In what world does a CPU work with less voltage at a higher frequency? As far as your voltage and temps at idle, It's fine. All the...