Recent content by T.Bull

Press the imgur and you will find them. :)

Do you have any pictures regarding the cable management? I have a node 202 and the internals are not for the faint of heart. I have been tinkering with making a 3d printet top for the case to show the inside, but this is SOOOO much nicer. I am looking forward to the 22. very nice work.

Not even if you open the spoiler?

Today i made a carboard mockup of the case with dimension. It looks like it is going to be a tight fit with the current measurements. But doable, so i am getting myself some aluminium and cut it accordingly.

A usb outlet on a pc is usually regulated to 5V/500 mA which would be more than enough to power a capacitive sensor. But are thes always on? As far as i know they turn of when the computer turns of but i am not aware if there is a work araound, do you know that @VELKASE Michael ?

Im not shure how tall the cryorig c7 is, but as i have have seen that is the go to air cooler for most youtubers. If it is possible to fit that youre on pretty solid ground. :) Edit 47mm.

I found

I think th easiest way to do it is to couple it parallel over the motherboard pins And by the way, how do you power the circuit? My best gues is that you would need some sort of active component to make this.

Would it be possible to connect a LED to see if the "button" is "pressed". It could be usefull in situations where a force shutdown is required and the button has to be pressed longer than just a tap.

If you are able to fit a flex, that would be awesome, i have seen some with 500 watts. Do you have a test sketch for something like this? But with a flex atx psu, a 1070 and a i5 8400 (my setup). I could be worried for rhe temps if there are no fan to circulate the air across.

First of all, really nice work!! I think the wider version is more popular because of the lack of low profile coolers for 39mm, i have only found a few. Have you though abot placing the 2.5" drive in the front of the case, and then have space enough for a fan in the bottom?

I am not shure if i could fit a 120, maybe if it is parallel to the bottom. But with a quick search i found this aio cooler for 92mm fans, and that could be a cool. https://www.asetek.com/desktop/oem-cpu-coolers/545lc/

My plan was to see if i gould fit some venting around the gpu. The top cover is 66mm on the drawing, so there should be space for 60 mm fans. The cpu cooler clearence should be aproximately 55mm which is more than enough for a noctua NH-LI9i

It looks like the link works for me, but i check up on it. But i found another link that might work. https://www.tinkercad.com/things/hoAvWzNSB1D

I have made a simple 3D model af an ITX case i think that might be fun to make. But before starting getting the things i wanted to ask the big wise community if you knew a case looking like it, or maybe have some ideas to make it better. the case dimensions are: H: 282,5mm (11.12inc) W: 200mm...