Recent content by Shaun2029

Make sure the Deskmini is unplugged XD Good luck!

Be very careful, this is risky and can lead to tears. Remove both the RAM sticks before proceeding. The VDD of the SODIMM RAM slot will probably connect to the capacitor of the power stage. In the pictures above, these are the larger yellow/orange components near the grey components marked 2R2...

Yes, you can use a multi-meter set to resistance, or continuity to test your guesses.

I have posted images here with the possible RAM power stages. https://postimg.cc/gallery/GvJ9hWG I have not looked but DDR4 probably requires a few different voltages, a DDR 4 pinout may help find the correct power sage to modify. The trick is to find the correct one, and what IC is controlling...

Thank you. Have you looked at the bottom of the board? There seems to be a power stage there. This is from images I have found on the internet. My Deskmini is installed and I do not want to take it apart just yet. It feels like I have taken it apart around a hundred times XD If you can get me...

I now realize that this post belongs in the MODS forum section.

Correction - Core Performance Boost is enabled, not PBO.

Deskmini-A300-SOC-and-CPU-Voltage-Hardware-Modification Deskmini A300 SOC Voltage modded to 1100mV - VCORE Max 1388mV https://github.com/shaun2029/Deskmini-A300-SOC-and-CPU-Voltage-Hardware-Modification I was unable to get my Ryzen 4600G stable with PBO turned on. I tried to increase the SOC...