Recent content by selectallfrom

I received the tempered side panel package today. It came in two pieces, a front and back panel, both of which attach magnetically. The font panel is slightly darkened with a black border. The border is ~1/2" (~13mm) on the sides and ~3/4" (~19mm) on the top and bottom. The back panel is...

FYI, Streacom just announced a number of accessories for the DA2 today. https://streacom.com/news-item/da2-accessories/ Wil be picking up the glass side panel once the retailers have it in stock.

You can purchase them directly through Streacom support. It should be around $9 per pair plus shipping.

Yes, the bottom horizontal case support bracket had to be removed. I also had to loosen one of the vertical brackets as well so I could squeeze the horizontal one out.

That is what I though as well, but I just read this on their twitter feed :(

I was holding out for the Chromax version of the NF-A12x25, but that recently got pushed back from Q1 to Q4. The Vardar EVOs might be worth a tryout. They look slick and have higher max RPMs than the Chromax NF-F12s currently installed.

Cryorig H7 Plus

After some tweaking I was able to get my temps to a more reasonable level. 2700x on Asus x470-I 3.9GHz @ 1.175v - 72.8˚ CPU (tdie) after 20 min (Prime 95 sFFT) with GPU idle 3.9GHz @ 1.175v - 81.5˚ CPU (tdie) after 20 min (Prime 95 sFFT) with GPU max load (73˚) Streacom support reported the...

Thanks. It's an Cryorig H7 Plus, cooling a 2700x on an Asus X470-I.

First build finally done. Thanks for those that have gone through all of the trial and error of experimenting with different layouts. Not crazy about the temps I am seeing with the air cooler (high 80s), and the Chromax exhaust is pretty anemic. Will likely have to adjust voltage or drop my...

Wow, great job with the build, especially the cable management. I have a SF750 on the way and this some ideal cable routing.

Drat, thanks for checking. Once my case comes in I will have to do some testing with some spare 120/140 fans I have laying around to see if they can get close to what you are getting with the NF-A12x25.

Great to hear this layout is working so well...you are taking a lot of guess work out my final build. Can you tell me how much clearance there is between the GPU and exhaust fan? I am trying to determine if using the EVGA PowerLink to route the PCIE cables to the side of the gpu will leave...

Custom PSU cables tend to be pricey and there are variety for materials used (typically paracord or nylon). For example, I had custom paracord sleeved cables in the past and though they looked very nice, they were not particularly bendable. modDIY makes lower cost custom PSU cable sets and also...

There was a post from the other day by Streacom. "The DA2 brackets we will make available for the channel to sell them as a kit after the CNY, till the brackets are available @ your local store ( which would be probably around Q2 due to the CNY +production+shipping), we will provide the...