Recent content by Samer

This Tesla needs less power per GPU , if you choose the top chip that consumes 250 watts each , you cant put 4 of them on the 280mm long board it is impossible ... you will need space for the power circuit as well for each GPU and would end with a 1000 watt card which is not allowed by the specs...

so when can I buy one :) ? I can pay for prototype price if it will take long. By the way , expect that there will always be a 250-300 watts Graphic card , volta or not .. if they manage to lower the power they will take advantage of that and make a dual GPU on one card with the same GPU. When...

and what if I wanted X299 motherboard and X series i9 in your case ? The higher end 44 lanes CPU with quad channel memory consumes alot more power than entry level 16 lanes CPUs with dual channel memory and less cores... True some people will never use more than 95 watts CPU . but I am going...

not really, I am planning on 2xGTX 1080 ti and 14 cores intel or 16 cores AMD CPU ... as I said , I dont want the power supply to run 100% and for this 800watts SFX-L is not enough. I will need 1000 watts minimum. and I have 2x SFX 600 watts from corsair in mind , they are the best SFX in the...

and how about 7940X + 2x GTX 1080ti ? this will need 1000 watts power supply ... 2x Corsair SFX 600 watts is in mind. and how about single Dual GPU Vega card + i9 ? and use the other slot for other cards (2 cards ?) you can cable 3 slots by the way if you use only one card for GPU. and for this...

you will need two power supplies for many reasons (with 2 GTX 1080ti and cpu) : 1- Reason one : Intel i9 CPU 14 cores and up , Power TDP = 165 watts without overclocking (will hit more than 200 watt with OC)...

you can use Inwin Aura Fans , they have chained power connector , this will help alot in mnimizing cables used https://www.inwin-style.com/en/fans/aurora

you can join them together in one cable , and make sure the plug and cable diameters can support 1800 watts . is easy to do just thicker wire. something like this , but thicker cable to take 1200 or 1800 watts

More ideas : HotSwapp drives in the same location of the second SFX I recommened : the most annoying thing in such compact cases is change the drives and plugging /unplugging cables. so we can use hot swap bay in there for minimum cost .. how ? easy Just TWO or ONE 3.5 inch drive metal bay...

they do work with the cable I posted and power up together. this is not chaining. this is just giving signal to both to start up at the same time. thats it. after they both start up the same time , they will be used independent of each others , one for mobo + some card plugs and the other for...

cool man , Make sure to add mounts for TWO SFX power supplies. the 260mm length is there . you will need a cable to start them both up without timing issues , like this cable : https://www.amazon.com/dp/B072JM7KVD/?tag=theminutiae-20 more over , the Exact place of the second SFX powersupply...

Hello , first let me say to you congratulations on such a nice design. I have this idea man , you are sarcificing alot just to use 1u powersupplies with 250 length ? listen to me carefully , you already increase the width of the case to 13.2 cm .. this means , you can now use SFX...