Recent content by ricsonc

You might want to weigh your build first. My build is 7KG. I am using the case in reverse but I was toying with the idea of wrapping paracord on the top or bottom grill. Issue for me is since I am using it reverse, It will be harder to wrap because of the riser standoffs being in the way.

Are the temperatures for Ryzen 3000 significantly bad. I saw this and saw the Hardware Canucks video where they even featured the same cooler I am using and their temperatures look fine haha

Results aren't great temperature remained the same when I changed to Thermalright's 140mm slim fan that has 120mm mounting. I also modified the Noctua L9 120mm adapter J-hack made. It ended up making more noise due to the size even at a lower 1300rpm

I see... Got it. I did not initially catch that this is what you meant. Thanks for clarifying :) Yeah I agree, but then even on stock I hit this temps then throttle and still see 1.4v spikes. I will keep my settings then and be more mindful

What I am trying to confirm is if there is a way to just throttle at 90c while on manual overclock. I know it hits 90 and over whatever I do on an ITX case. If I return to stock throttling will happen at 95c but I end up with unwanted 1.4v spikes. I know it runs hot. I know I have no other...

I have remounted my cooler multiple times with same results. I am not thinking my thermal paste is bad. I am using Hydronaut. Guess I should find an alternative? Regardless, my goal is to still thermal throttle at 90C with manual overclocking. Seems not possible I guess.

From what I understand this means that thermal throttling is not possible under manual overclocking? The reason I manual overclocked in the first place is because if I keep everything stock I can see that there are voltage spikes to 1.4v even if I use voltage offset my motherboard does not seem...

Looks interesting. Worried about the longevity of the PSU if it will be a regular flex and left turned on always. Any plans for such a case? I understand that ATX spec'ed PSU's don't like being on unless there is load right?

I have recently build a Ryzen system. I have fully dialed in the manual overclocks I want. However, whether or not PBO is enabled or disabled. My processor is not thermal throttling. What is the proper way to ensure Relevant specs as follows: CPU: Ryzen 5 3600 4.125Ghz @ 1.2v core 1.15v SoC...

Thanks for the fast response. All to ground then I assume? In that case, we can just find an unused ground pin from the 24pin and ground into it.

I do not understand the discussion around the sense pins. How will that affect me if I still power my GPU directly from the PSU and only use M2426 to replace the motherboard's 24pin? I think this becomes an even more relevant question seeing that the new Silverstone SX750 has a dedicated 4-pin...

Thanks for checking! The sever power supplies can be wired to end up like external power bricks so all is good.

Thanks for the response! I'll probably wait for this then than get a M2426. My reasoning is that I want to keep this long term and use it with other external power bricks in the future. I am confused as to what 5VSB and 12VSB is for. If the 200x will work with external power bricks then it...

Yeah! that setup is the dream setup at the moment! Thanks for that render. Thanks for the notes on the cooling. I am using a Thermal Grizzly which I thinly and evenly applied. Unfortunately I am unable to mount the cooler 90 degrees the mounting does not support it. I am running a constant...

Joining the bandwagon! Thanks to @riba2233 for accommodating my request! Now if I can find who has the other panda! I had wanted to run a 3080 with the EKWB Classic waterblock and build an "AIO" for the GPU using a 120mm radiator and an Eisbar LT dangling around as my pump. Based from my...