Recent content by psamathe

Feeding a picoPSU with 12V from your normal PSU won't properly deal with powering the normal PSU on from the power button connected to the motherboard. This signal goes to the PicoPSU which doesn't have any power since your PSU is off until the motherboard tells it to power on. You can force...

The fan in the FX350-G is a 40x40x15mm Jamicon KF0415B1HR-R. 12V, 0.17A. Doesn't seem to be PWM-controlled. Judging from this catalogue it has air flow of 8.84 CFM (~15m³/h) and static pressure of 0.237 inchH2O (~6 mmH2O). I was going to change the fan until I realized it's 15mm. I guess any...

Yeah. That's why I decided against remaking the ATX, but even then it might take up more space than available. I was planning on cutting the cables at different lengths when I add the connectors so that the connectors doesn't bundle up together but are spaced apart. In the worst case scenario...

The thought of just cutting the cables at the right length from the beginning never even occurred to me. And yeah, I guess it was because of the implicit assumption that the configuration might change one day and then I would just be able to switch out or add the cable I need if I made it...

I won't open it at all. I'm cutting the cables outside of the PSU.

Background I'm soon going to start a build in a ZS-A4m so I've been looking at FlexATX PSUs. I'm in Europe so there's less to choose from. Imports from outside of EU will be taxed in addition to the generally more expensive shipping costs. My best choice seems to be the FX350-G. It'll be...