Recent content by Maz

They used to. Not currently in stock, but may come back: In the meantime, perhaps try this workaround?

The left-oriented plug is the standard equipment for the case. It's the preferable choice if, when looking down at the top of the case, the beveled side of the PSU 's power jack is pointing towards the right, so that the cable is pointing directly at the rear panel. Many SF450/SF600 builds use...

If you decide to have the fan intake on the inside, you will probably want the right-oriented power cable as well. You can just barely get a bend on the regular cable to make it fit, but it's probably not good for the cable and would get in the way of an optical drive. I have mine set up that...

To clarify the point, is that expected to be "limited, one run only" or "limited, but might be restocked in future runs"? (I fully understand if that's not a question that has an answer yet!)

Consider also the NH-U9S, with an extra 92 mm fan on the back. Easier to find, much easier to fit (can use SFX PSU in standard position), and only slightly different in performance. This will block a side fan in the rear position, but you can still fit one on the front position. The PSU...

It can, but which GPU? My 1060 6GB runs quite happily without any extra fans below - about 40 C idle and 60-70 under load - but that's towards the low end of power consumption for what people choose as GPUs around here. This is exactly what I do too (well, with a SF450), and it works great...

Which motherboard? I've got a SuperMicro board that deliberately disables one of the ports from its USB3 header, since it provides that one as an on-board port instead.

I've got one. Not a ton that can be said about it - no trouble to assemble, board is well-labeled and looks good, booted up without fuss the first time and is working away happily right now. I'll take that! I'm not pushing it too aggressively yet on my stock-speed 2600X, so I can't say...