Recent content by luke2122

Sounds better, it seems that you’ve already found a balance, silence is a significant merit if using Nh-l9a. When I use AXP90, the noisy of turbulence is a little bit annoying although it can offer better temp control. I haven’t considered this problem before my build.

Yeah The limit is 2-slot, So far Asus hasn’t released two-slot 3060ti and 3070, so I end up with buying gigabyte eagle 3060ti OC which is perfectly matched in this case. But if you want to get 2-slot ASUS 3060ti you can wait for its mini dual version. But I don’t know the exact releasing date.

Probably regardless of other factor, this is indeed attribute to the coolers’ performance. My current idle temps can stabilised around 38-42 degree at 4.5G/1.275V with 1100 fans rpm and 10℃ room temps, the list as below shows different temps under diverse types of games I normally play, it can...

That sounds weird, it seems the only variable is the cooler which should't cause a large difference at temps. what is worthy to mention is that I didn't even carefully note the temps after turning on PBO and just manually set my voltage to 1.25 and clock speed to 4.5GHz to test and use. Up to...

Thanks man, K6 is really great.:cool: And yeah, Full back version is also copper, and compatible with both inter and and cpu as well as additional backplate. I think its performance would be similar to Blackridge but better than Noctua L9a in Dan A4. Also I do agree that waiting several weeks...

Sorry I haven’t compared the FPS changes before/after OC, but there are obvious improvements when it compared with my previous CPU( i7-6700k), especially during single-core biased games like Civilisations 6, EU4.

As you mentioned, maybe you can also update the bios to see if there is a improvement or check the cooling installation? According to many users' review, the 5600X indeed has a better thermal performance than last generation. I updated my motherboard to latest Bios and locked my CPU frequency...

Hi, I advise you can use Cpu-z to check you voltage and frequency firstly, your high temperature is probably due to a high voltage caused by PBO, you can go to your BIOS switch off PBO and input an target Cpu frequency and a lower cpu voltage value manually, and try out a couple of times via...

Based on my study, I just thought Axp90's fan will be louder than Noctua a9 Chromax fan, but actually it seems no distinct difference, so if you really wanna remain noisy at a low level, it is highly recommended to adopt Noctua a9x14 normal version (the brown one)

I used one Noctua black 9x14 fan right below the motherboard and install another one on top of axp90 instead of its original fan, and put the axp90's original fan below the corsair sf600, and the bottom fans' and cooler fan's direction is just as photo is shown. Hope it is clear this time.

No worries, very glad to share with it, hope you could get your build soon.

Just figure out how to upload photos

Exactly?

Sorry I think my expression would be wrong, my fans setting should be exhaust.(exhaust air towards cpu:() Thanks for the mention, I guess even the mini card perform hotter than the larger one, but may be 3060Ti should be all right compared with 3070 , anyway, just wait to see the test first :)

Hi, I set up my case fans as both pull air, I haven't studied the differences before my build. The reason why I prefer 3060 ti Mini is I reckon the weight /size and the temperature would be more vital than the performance, I guess the Asus 3060 Ti mini would be a smart choice as a balance...