Recent content by Ldthxv

Thank you very much! With your good description I managed to get my A300 back again: flashrom --programmer ch341a_spi -w A3MSTX_3.70B flashrom v1.2 on Linux 6.1.4 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops...

Adesa 1.0.0.8 is from 02/28/2022 and fixes some CVE. So it is a welcome update for older AMD 3000 Series CPU.

I updated one A300 from 3.60K to this this 3.71A and it went without any problems. System boots fine. Then updated another A300 from 3.60U to this this 3.71A and that is now bricked. So I assume any 3.60S or 3.60U with Renoir support will break the A300. You said you manged to fix this. How did...

Thank you very much! With this I could go back to 3.70. And now I could flash it from bios to 3.60S to be have renoir support. 😃

Thanks for letting me know! I think I will leave mine as it is and give it to a friend with the 2400G and get myself a X300. I wanted to get a new one in any case but did not know if I should take the X300 or the iBOX-V2000M. But seeing that the X300 now has support for Zen3 I would think it is...

Correct! I just inserted a 2400G and the system boots up fine. Everything is working again with bios 1.58 from X300 and the 2400G APU. I did try to flash back to 3.60S. Instant flash would not allow me to do it. Renaming A3MSTX_3.60S to X3MSTX_3.60S allowed me to choose it. But it then said...

I tried this. Was able to boot after flash. Booted into setup. Removed core boost and changed fan settings and rebooted. But then it failed to show anything on screen. Power off. Waited a while. Power on. But now the Led will not even turn on. So it is bricked. Will now try and get a CH341A...

I use an external watt meter and just measure what the A300 power supply uses. Only when running graphic benchmark can I see a maximum of 90 watt. However, as soon as you do something CPU/memory intensive it goes down to 60-70 watt. With the 2400G and 3400G it was easy to get the box to use 90...

I have the A300 and use it with a 4750G. Temperature is much cooler then with the 2400G and the 3400G. At idle it is just using 7 Watt. The 2400G was using more the 10 Watt. But also under load the 4750G is using less power and temperatures are no where near what I have seen with the 2400G and...

Thanks. I got my drive back with 3.60H by removing power for a longer time.

My NVMe SSD (Samsung 970 pro) also was not detected. Flashing back 3.60H did not bring back the drive. @TomHC81 did your drive come back with stable 3.60?