Recent content by Knufire

You can 3D print replacements in a pinch.

I was hitting tjmax (100C) without it so it was a bit necessary for me. This is partially because it's an older CPU; any modern chip is going to be much more power efficient. I also had the capability to produce the parts myself so the cost was pretty minimal.

It's only a 5mm long standoff, I don't know if shorter M3 standoffs are common. However, you could probably 3D print a spacer between the riser and the back of the motherboard panel and use a slightly longer through-bolt. FYI, got the custom cables in and finally got the case put back...

Any updates on when you or Jhack will have these back in stock? If it's still going to be a bit, would you be willing to post dimensions/CAD/a dxf of them? Might get them made at SendCutSend or try to engineer a stiff enough 3DP design.

That specifically says height, not depth. The losercase mod just moved the GPU straight up.

Pretty much this, my dancase has been flawless with my current requirements, but with C2077 coming out and now getting a 3080 I feel like I'm really pushing the limits of what you can do with 7L. Another side note, Sliger posted some internal testing of the 3080 FE with a 645LT in their SM550...

Is there a consensus on whether the 3080 FE or the XC3 is the better solution, and whether flipping the PSU works in practice without thermally shutting down the unit? I got my FE today, but I'll be waiting on some custom cables before I can get everything to fit to do some testing.

Ahh balls, can't edit the post to add an image, sorry for the double post:

Got a 3080 FE today, confirms that it does fit with the 645lt + losercase mods.