Recent content by jerewarrior

small update 😁 moved led psu under gpu, waiting motivation to assemble my diy cnc kit someday to make the sidepanels. 3800x under volted bu -0,090 mv, -100mv to soc voltage, memory timings 18 20 20 tras 34, trc 60 , and undervolted to speed of 3000 mhz temps now without top hat n without panels...

after my bt 02b u3 build hitted snag, i decided to try something else and digged my ophion 7l case out of storage. some brain storming later i decided to utilize pcie riser and rotate mobo 90 degrees to install dual slot gpu (rx6600, gonna give gtx 1060 to friend) and hdplex, there will also be...

this was quite incredible, real pocket rocket 😍🤯

my duster/datavac thing is itdusters compucleaner, and yes it was not cool, i bought it from sale last year and until now had no problem, it was also my first proper cleaning for quite awhile by taking all parts out of case, dusting case and then installing all back without any dust left., i...

i finally got some time to try my parts inside somewhat modded case, and came up with slight snag at my plans since old mobo and r5 died after dusting with datavac :( so got new motherboard and cpu which slowed down this case project due to need of saving money. with new cpu and mobo i then...

fixed the pictures, thanks to Valantar for spotting problem with them ! yours - jere

trying some 8 euro costed black mesh thing for cars that i have bigger piece in stash, fine tuned side/top panel part so that it can slide in fully, also added m5 thread inserts to noctua slim fan to have proper thign to tight screw into. yours - jere

some ideas so far: i have some hopes to either fit modded fsp flexguru 250w (i have made adapter with 10 pin molex connector to get power for one 6 pin psu and for ssds to use instead the factory 10 pin that spits out lots of hdd/ssd power cables, same concept that Custom Mod used at one of his...

some progress: i cutted out hole for upper fan to breathe with dremmel and filed it somewhat, i am pleased with my results, as this is my first dremmeled hole 🙂 also installed old dust filter using double sided pe foam tape. yours - jere some photos:

greetings, its Jere here!, i have started new case build/slight modding to transplant my current parts (r5 2600, gtx 1060 etc) to inside of chieftec bt 02 u3 case that i finded for 20 euros. i have been desiging 3d prints to fight this cases absurd 1 slot gpu limititation, designed some...

after making 3rd iteration for silverstone mod i finally managed to get enough pressure and good temps, after todays tuning, with 50w bios, core got with 750 ti 1416 mhz and memory to 1700 ~1750 mhz and for my joy max temps dropped from 88c to 47~50c with fan speed of 100%~80% as a result of...

i loved every page while reading, looks so damn cool ?

after having some time to think this project, i was eyeballing my very,very,very bad drilling job ? desided to see if silverstones nt07-115x copper core could be removed, and thus enabling me 3d print/maybe ask friend make aluminium mounting adapter for gpu cooling. if possible i would not need...

i made quick, very ugly mod to lc powers cooler, sometimes you need to sacrifice something for your hobbies? i am going to get proper hobby drill press to get better and straight holes ? that way i can install another of these after it arrives using proper 4 point method with m3 threads but...

sadly i need to report that my idea did indeed work, my 750 ti stayed between 65-67c when using firestrike as a test (barely ideal temp for card with modded 55w tdp) but the noise from dynatrons fan is way too loud at 65%-75% speed to get temp stay there ? so it seems that i need to use either...