So I recently picked up the Sliger SM580 along with the Alphacool Eisbaer 280 CPU along with the GPU block extension, but I noticed the CPU/pump combo was too tall. Is there an reliable alternative cpu/pump combo that I can swap out?
Does anybody know what type of screws I need to mount the fan and the radiator to the Dan Case A4? Apparently my order of the 645LT did not come with any other screws besides the LGA 115x post screws, thumb screw to secure the pump, and the 115x bracket.
I didn't realize the 9700K was only 8c/8t as opposed to 9900K with 8c/16t. That would also help future-proof my build for the time being. Then I guess it's settled, I'm swapping out the 9700K with the 9900K. Thanks for the advise.
For the fan under the mobo and the AIO, would you recommend...
I appreciate all the input that I've received so far. Here is the list on pcpartpicker that I've made some switches:
I've changed out the ram down to 16GB, swapped out the graphics card with one that should fit the A4, dropped a Noctua fan, and will be getting the Asetek AIO for CPU cooling. I...
Mostly gaming, I chose 32 GB as that's in my current system. I can probably save a few bucks and go down to 16GB.
I forgot to mention it was either the Noctua cooler or the Asetek AIO. Should I set the fans under the mobo and the aio as intake or exhaust?
So I recently got my Dan Case A4 in the mail last week from the April pre-orders. I haven't ordered any parts yet but since I'm still in the planning stages.
Here is what I have spec out so far
CPU: Intel - Core i7-9700K 3.6 GHz 8-Core Processor
CPU Cooler: Noctua - NH-L9i 33.84 CFM CPU Cooler...