Recent content by iAvoe

  1. iAvoe

    Concept 8.7 Liter 320*85 Case with 120*38 Rad+Fan "CLDS" V2

    I just updated a vertical GPU version, it makes a plenty of empty room, hmmmm
  2. iAvoe

    Concept 8.7 Liter 320*85 Case with 120*38 Rad+Fan "CLDS" V2

    Hmm, it does shrink the size vertically but extends it's thickness, that may change the psu to a sfx one I guess
  3. iAvoe

    Concept 8.7 Liter 320*85 Case with 120*38 Rad+Fan "CLDS" V2

    I think the clearance you are saying is a combine of VRM and chipset heat dissipation, RAM stick height, 24pin power cable height. However they are all solved here, so now I'm trying to figure out what others you could be referring to
  4. iAvoe

    Concept 8.7 Liter 320*85 Case with 120*38 Rad+Fan "CLDS" V2

    I don't see where are fasteners needed(according to design, the side panel will have 8 longer screw holes to hold 2 80mm fans), and if the ram stick is too high, we can just take off it's heat sink. I don't see any other components are taking the height, but I think you are probably right and I...
  5. iAvoe

    Concept 8.7 Liter 320*85 Case with 120*38 Rad+Fan "CLDS" V2

    For cabling, 10mm clearance is not enough to pull out cable from PSU, but I took the fan's hollow structure as free space, so it should be no problem
  6. iAvoe

    Concept 8.7 Liter 320*85 Case with 120*38 Rad+Fan "CLDS" V2

    It didn't took me long, but a huge amount of brainstorm to get an upgraded version of this project, now it's named CLDS referring Clundus, a random name that also took me long to generate :) Disclaimer: I don't own this design As you can see, the drawing is much better, and the tilted GPU...
  7. iAvoe

    Concept SFF 8 Liter High Air Flow Case Design

    You are right, I'll take more time to redesign this case, next time you see, it would be much more legit :)
  8. iAvoe

    Concept SFF 8 Liter High Air Flow Case Design

    Just saying that it's cooling the NVME SSD, not 2.5'' SSD tho :) and I feel the blower has a much larger intake area (around 140mmSq), or we can change the design to make it like LianLi O11 that just put large fans moves air into the case, pulled out by other fans and it's taller than 1U size...
  9. iAvoe

    Concept SFF 8 Liter High Air Flow Case Design

    Ok, I'll answer all your questions one by one, no problem, sorry for confusion: The CPU has its own cooler with a fan, and a ~75mm tall space to make the heat sink large enough (e.g. SHADOW ROCK LP), which even the blower doesn't exist, this build can handle a stress test Then, the blower...
  10. iAvoe

    Concept SFF 8 Liter High Air Flow Case Design

    The real problem for sff case it's actually hot air around the heat sink than the heat sink size, although more heat is extracted from the processor temporary, the cooling capability is lost by time because of the air flow is not fast enough to extract the heat. VRMs and chipset also heats the...
  11. iAvoe

    Concept SFF 8 Liter High Air Flow Case Design

    I have to hand out this blue print since I have no resourse and time to make this real, so feel free to take it :) By the way I don't think a blower really take this much power, or do they? The honey comb was designed to be a mix of large hexagons with more smaller hexagons, but It's probably...
  12. iAvoe

    Prototyping CoolerCase ...a case that cools...

    The problem i can see is difficulty of keep it clean, because hot surfaces can attract dusts and make sugar super sticky, so you probably don't want to eat and drink beside this case, just personal opinion~
  13. iAvoe

    Concept SFF 8 Liter High Air Flow Case Design

    This is a imagined PC case designed according to existing technologies, based on Sentry 2.0, re-designed to optimize airflow Requirements: Remove ram stick heat sink One maximum of 1U power supply Optionally remove IO shield Optionally install 90 degree 24 pin motherboard power extender for...