Recent content by Engineerer

Ok. Some forums do force introduction which is odd to me. Lol looked like this welcome message on the site was passive-aggressive and introduction would have been required for the editing.

Here is the finished build.

Build is starting to be pretty much complete. I added Corsair's 135 mm fan NR135P on the top of the case to get temperatures in check. At first I had some issues with the fan as it was always going full speed regardless of the PWM control from the motherboard. I disassembled the fan and found...

And here is the front plate for the power button and WLAN/BT antennas. Same acrylic sheet used here as in the rear of the case. Two TE 2344657-6 antennas can be seen behind the plate. These were easy to attach with their own adhesive.

Fit testing for a custom power button. The button was just around 4 € from China. Not very nicely finished, but good enough. Lightning bolt seemed to fit the PSU theme.

To minimize the height I placed cooling fans between two heatsinks. The bottom heatsink is for the CPU (Noctua L9a) and on the top will be graphics card's heatsink. I replaced the connector from the 92mm Noctua fan so it could be controlled by graphics card. The smaller 70mm fan will be...

I was hoping that my PSU case idea would have been original when I started. It was kind of disappointing when I found that similar builds were already done :D Well as you said every PSU case is still done differently.

I found a bug. I can't edit my posts. Maybe this will help. What is the point with this mandatory introducing anyway since you get to know someone anyway if they're active members. :)

As the height of the case will be limited I cut the motherboard risers as short as possible while bottom side components still had small gap under them. I removed old PCI-E power socket from the old PSU as this will be used to power the complete system. Also the 8-pin power connector for the...

Hello all! I though you guys might appreciate my recent mini build. The project was originally posted in a non-english forum and this will be pretty much translation of the original. I wanted to build a gaming capable HTPC for living room and I wanted to build to be as small as possible...