Recent content by eldy

thankyou for that, very helpful. So I have upgraded to v3.60S and the Windows 11 Health Checker app still says 3000G is not compatible! I can only assume its a bug in the app, I suppose I will find out Tuesday.

Hi, I just downgraded my A300 (3.7bios) from 2400G to 3000G CPU so I can get Windows 11 when it's ready on Tuesday. Ive run the Windows 11 Health check app and it says 3000G is not compatible?! It sure is when checking the Microsoft Windows 11CPU compatibility website, do I need a more recent...

Hi I just managed to get a good deal on G Skill Ripjaws 2 x 16GB modules (DDR4-2133 (PC4-17000), CL15-15-15-36, 1.2 Volt, Non-ECC, 260 pin, Single Channel ) They will be replacing my Samsung 2400mhz (2 x 4GB modules) Am I likely to notice any performance drop If i replace due to the lower mhz?

just saw your reply, thanks for confirming, yep the spacers are glued on and come off easily!

further update, the fan is stuck against the case which is preventing it from moving! so Ive taken out the 4 spacers screwed between the fan and heatsink to get the 2mm space, fan is now moving when in the case, but will contact between the fan and heatsink cause issue ?

Ah ok, it was too tight, I got a pen knife and cut off the top bit of the cooler, around 5mm, used to hold the shroud, and now goes in the case with no problem. It seems there are two versions of the AMD Wraith fan that come with the cpu, mine has a 2mm gap between the fan and heatsink which...

Hi I got the deskmini 300 today along with a 2400G Ive taken the shroud off the cooler that came with the 2400g but cannot get the tray back into the case because the cooler is about 2mm or so too high. ive screwed the cooler fully into the motherboard. Do i really need to force it into the...

Hi, Im interested in getting the Deskmini A300 as I have 2 x 4GB SODIMM lying around. The modules are Samsung DDR4-2400 @ 1.2v cl17. Will these be ok to use ? I plan to get either the 2400g or 3400g. PC will be used for general web browsing & office work.