Recent content by ckrueger99

  1. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Too bad the title of the video didn't contain the product name. I hate that.
  2. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    It would be good to get our case listed on the SFFPC Case Wiki list.
  3. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I hope he's got the V-6 and deluxe disc brakes, because that puppy is going to be HEAVY.
  4. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I hope you'll have to get a bigger mini-van for the next shipments! ;-)
  5. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    The Kickstarter link appears to be broken.
  6. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Getting back to the Chimney vs Ventilated Side Panel config question, surely an important factor would be whether you're using water-cooled CPU and GPU loop. In that case, the airflow of the Chimney design will be less constrained by CPU and GPU heatsinks, so the temperature penalty should be...
  7. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Huh?
  8. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    If only there were some kind of "case", optimized for cooling, that could be used to contain these components.
  9. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    How will cooling capacity differ between solid (chimney) vs perforated side panel (exhaust top and bottom) cases given a dual 280mm rad set up with liquid cooling on both CPU and GPU? The solid will have warmer air flowing through the upper rad but perhaps better airflow overall? Can you...
  10. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    The Black Ice Nemesis 280GTS® Ultra Stealth U-Flow Low Profile Radiator - Black Carbon is back in stock. Be quick!
  11. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    How to use the ROG Crosshair VIII Impact miniDTX board in the Winter One: 1. Shorten the DIMM.2 board by 12mm like this. 2. Replace stock riser cable with a longer one.
  12. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Can anyone recommend a hard case for carrying the Winter One on an airplane (remember those?) or send via FedEx et al?
  13. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Wow! These are beautiful 3-D drawings. How did you do them?
  14. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    The best solution I can see is the x8x8 Bifurcation Riser from C_Payne, but this will require a longer riser cable, something like 220-225mm up from the 185mm 175mm one supplied with our case.
  15. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I’m pretty sure your calculations are correct. Based on that, I went with Alphacool pump and the Alphacool 1u reservoir top which allow a lot of mounting and filling options.
See more