Recent content by ChorizoNinja

  1. C

    Log REVOCCASES RCC-BIG560: 3 x 280 mm radiators sub 20 L

    @REVOCCASES make this case happen again before 4000/7000 series happen!! <3
  2. C

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    @REVOCCASES it is a shame, because I would pay anything for a case like this, with the same base dimension of the winter one, but just a little bit taller, and get rid of the stupid riser.
  3. C

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    I would assume it will never happen at this rate @REVOCCASES
  4. C

    Prototype REVOCCASES RCC-BIG560 | custom BTO case | maximum flexibility for high end hardware in <20L

    @REVOCCASES Is there any timescales for this to happen? I am going to move from a winter one to this as it seems that power of new gpu is going through the roof, and I will need an sfx-l power supply yes or yes, and I am tired of risers, 4.0 barely works, 5.0 with PAM4 I think will be a nightmare.
  5. C

    Concept Vapor Frame: The Incredibly Functional Yet Beautiful Sff Case

    Double post... Phone is not having a good day
  6. C

    Concept Vapor Frame: The Incredibly Functional Yet Beautiful Sff Case

    This is a nice case. Can I have one? A 12900k and a 3090 will be really happy ;) Are there any plans to have both panels with mesh?
  7. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    @WinterCharm Is there any plans to gave the improvements for the IO Plate for owners of the 1st batch, even if we need to pay for them?
  8. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    After doing this for more than 15 years, to the point of using pumps designed for fish water tanks, let me tell you than something in the realm of 80L/h and above is more than enough flowrate, and after 150L/h you are just creating noise, between them there is only like 2C difference. The ddc at...
  9. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Duplicate post.... again :(
  10. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I dont know about your case, but we have workstation and racks in the office running with Lainijg DDC-1T 10W pumps that run heatloads of 1200W and water temps on some of them at a constant 55 - 58 degrees on the hotest part of the loop (after GPU) , with ZMT tubing and distilled water without...
  11. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    The only problems I have with my case are the io plate not compressing the rear io of the gpu correctly (and is a little bit damage, corner has small damage) and that I needed to solder the switch to turn on again, not biggie, as I wanted to braid it. The anodising of my panels is spot on...
  12. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Duplicate post :(
  13. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Would be nice if someone could create a mod to attach 2 noctua nf-a4x20 from the power supply holes to direct some airflow into the ram (for overclocking) in all exhaust config there is pretty much no airflow around that part with watercooling ;)
  14. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    I had the thermalright and the artic p14, and the sound of the artic is much pleasant, plus, you buy all 4 of them for the price of one thermalright (and they have integrated splitters ;) ). They are fluid bearing fans but, as this will be horizontal all their lifespan, it is not a problem.
  15. C

    Stalled Winter One -- 15.6L SFF case, 3090 Support, 3-slot GPUs, dual 280mm radiators, CFD Optimized Design

    Gallery Here is my build, quite impressed with the results regarding noise vs temperature, I will probably post something more tomorrow. Just as help for other people, have in hand at least one or two Koolance 90 degree low profile fittings if you decide to go with the pump bracket, will make...
See more