Recent content by BurningOC

  1. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    Yes the mobo plays an improtand role. The asus itx x570 and b550 have a tall m.2 slot. Optimum tech did cover this in a video. He had to remove the top connection and still had issues fitting a smaller card
  2. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    Yeah it strongly depends on you Mainboard if you have to mod the case or not. The asus x570 ITX has a M.2 Slot which stands out really high and makes it impossible to fit the gpu in. With another maniboard like in his case it is possible.
  3. BurningOC

    Production FormD T1 Classic (READ FIRST POST)

    Thanks for your quick reply! Problem is that this post shows only the GPU with NO Power Cables attached to it. I know that the Gpu fits according to its dimensions but I dont know if there is enough space for the PCIE power cables. Do you know anyone who has a complete build with this gpu?
  4. BurningOC

    Production FormD T1 Classic (READ FIRST POST)

    Hey guys I just wanted to ask if anyone fit a RTX 3080 EVGA FTW3 UlTRA Gaming in the T1 ? Also I would like to know if anyone fit a EK 240 AIO?
  5. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    To clearify things: you can get the card in the case with just bending the case. But if you want to remove the card then you also have to bent the case again. Since bending the case over and over will damage the case it just filed it wider.
  6. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    If you are from germany just wirte me in german a pm 😉
  7. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    You cant put in the GPU before the mainboard- well you can but then you won't be able to fit in the board anymore. You can acutally widen the entrance such that the gpu fits. I did try before i modded the case. But I had to bent the case too much and this is why I'd go with the mod. You need...
  8. BurningOC

    EVGA RTX 3080 FTW3 Mod

    Hey guys! I just modded my Ncase V6.1 a bit such that the EVGA Rtx 3080 FTW3 fits easily! The mod is really easy and only requires a file. I wrote an article about it on my website. Link to the mod: Ncase M1 RTX 3080 EVGA FTW3 Mod
  9. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    How do I do this?
  10. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    Thermals are relly good. With ambient temp of about 22°C to 24°C the card hits about 60 to 64°C in AC Origins with no undervolt.
  11. BurningOC

    Log Ncase M1 and the EVGA RTX 3080 FTW3

    Hey guys I just wrote an article on my website about how to fit a really large gpu (RTX 3080 FTW3) in the Ncase. I hope it can help some of you. Ncase M1 RTX 3080 EVGA FTW3 Mod I'd really appreciate feedback of you guys!
  12. BurningOC

    NCASE M1 V6 GPU Compatibility List

    Does anyone know some really low profile 8-Pin Pcie kabels? maybe with them it is possible to close the side panel. Availabil in europe would be good.
  13. BurningOC

    NCASE M1 V6 GPU Compatibility List

    Hey Guys I tried fitting the EVGA 3080 FTW3 Ultra in the M1 V6.1 and it works. There are two options. Either deshroud the card (but leave the fans on) or fit it entirely. The Problem is that the sidepanel wont fit anymore because the card is to wide. I want to post picutres but I cant do it...