Recent content by Amenothes

  1. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    They are set at the bottom of the radiator, pulling the air into the case
  2. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Yes! What is weird is the IDLE temps, coming from a 2700X where the Idling was around 28-34°C with temp spikes up to 45 ish. I now have it at 40 ish when doing nothing (still have Discord, Steam, CAM and 2-3 light processes). I've red that these temps are normal though.
  3. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    I'm running a 3700X cooled by an X62 + a RTX 2080 on an Aorus X570. I consider my temps are very good, lately played WoW on 3 monitors gave me 48-55°C on the CPU and 64-67°C on the GPU. I'm very happy with these thermals but am still curious to know if it can be even better. My previous case...
  4. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    What would be the best fan configuration for the SM 580? I'm using bottom exhaust and top intake from the AIO. Has someone run temps tests with different configurations?
  5. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Just one quick and dirty pic I took this morning before heading to work, not seeing much... I may shoot more in the evening.
  6. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    1- Order day 1, may I say minute 1 :D, so, back to the 4th of july. 2- Shipping on the 2nd of August (lots of delays mentioned in this thread, everything should be back to normal now). 3- At my door on the 5th of august.
  7. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Yay, package received my SM580 yesterday and PC assembled. Took me hours but the result is gorgeous! (1 vented on the GPU + 1 window on mobo). Building in there without custom cables will be a PITA as it's not necessarily easy with it...
  8. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    The question may seem silly but my PC is sitting on the right hand side, I'll be seeing the GPU side then, which is vented, could have been worse. On the MB side I'll have all my RGB stuff visible through a window panel, which will be facing the wall, pity right? Is there a way to swap the...
  9. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    A touch of Inwin A1 in this creation! Nice render.
  10. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    I did a bit of research regarding the upcoming/already there mini ITX motherboards, it appears Gigabyte is a bit stingy with its fan headers compared to Asus and Asrock (prices can hurt though): X570 itx comparison
  11. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    According to the pictures I found on Amazon it has 3 FAN headers: 1- CPU 2- Next to the RAM slots 3- Used by the chipset FAN... You may want to use a splitter in this case...
  12. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    Too bad as I'm an international customer, but I have a Streacom DA2 in the meantime... The 580 will take over right away, in august then.
  13. Amenothes

    Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)

    I believe we're very close to see the SM570/580 popping on their homepage!